clicker fidget - print-in-place

Single Color - Let Print Cool Before Clicking!!!

Improved Click Bar Please download this profile only if the original profile does not work for you. Download and print the designer profile first.

I've modified the click bar to be slightly shorter, as when I printed the original profile my button got stuck. The number of walls was also increased and infill removed, to make the spring portion return better.

Settings for best results on all bambu printers 0.22mm layer, 4 walls, 7% infill

0.2mm layer, 3 walls, 7% infill

0.16mm layer, 3 walls, 25% infill AND AS DESIGNER SAID: LET IT COOL DOWN BEFORE CLICKING.

layer height: 0.16mm infill 25 used support

After i clicked it some times it pops up

Clicker Creeper I didn't modify and settings with the exception of:

Bambu Green, Black

I used the AMS

0.2mm layer, 3 walls, 7% infill

0.16mm layer, 4 walls, 10% infill - 0.16mm layer height - 4 wall loops - 10% Cross Hatch infill - Slowed down speeds for first layer and general acceleration etc.

Perfekte Brücken

PLA_Speed_Optimized_15min I’ve optimized the settings for the perfect balance of fast printing, low material usage, and high strength with minimum quality loss.

Smooth Look - 0.12mm layer, 3 walls, 15% infill

0.28mm layer, 2 walls, 15% infill

Prototype v1.1 Clicker The Prototype v1.1 logo is imprinted on the front.

Looks really good in Black and Yellow

PETG is Recommended

0.2mm layer, 5% infill, fast - 0.2mm layer - 5% infill - fast - 2 walls

Clicker with Base cover Modified the original model to add a cover on the exposed side. It should just clip in, feel free to just use some glue if wanted.

Make sure the model springs are extended when cooling - makes it work longer.

(Added some internal chamfer to the top to make it even looking)

** Ready to share STEP files, but could not find a way within a print profile :(

Textured surface for the clicker 0.2mm layer, 2 walls, 15% infill