Slim & Square - Friction Fit Frame

One Frame Per Plate - 7 Sizes 0.2mm layer, 2 walls, 15% infill

Includes:

Square - 200x200, 150x150, 100x100

Rectangular - 150x225, 150x200

Updated June 2025 Added 100x200mm frame

Updated August 2025

Added a 120x120 Frame

Multiple Frames per Plate 0.2mm layer, 2 walls, 15% infill

A1 Mini - 150x150 frame adapted for magnets Considering this is the best frame created for hueforges to date, I wanted to modify it to be able to use magnets and also be able to print on the A1 Mini.

The magnets are inserted into the parts by pressure, and the parts are inserted into the corners of the frame after the hueforge has been inserted.

The pieces are designed for 10x3mm and 8x3mm round magnets.

If you need me to modify the 100x100 frame as well, please let me know.

150x112.5 for A1 mini rectangles Both plates feature a 150x112.5 frame that maintain the nail spot on the top. One vertical, and one horizontal.

0.2mm layer, 2 walls, 15% infill Der Rahmen wurde auf mein erstelltes Hueforge angepasst, da das Bild ein anderes Seitenverhältnis hat.

Hier ist das zugehörige Bild https://makerworld.com/de/models/907877#profileId-868225

Aber vielleicht kann jemand den Rahmen für sein Projekt gebrauchen.

Auch ein Dankeschön an den Designer des Ursprünglichen Rahmens

200mm 2x2 with connectors, 0.12mm layer, 15% infill Special profile to create a 2x2 frame fitting 4 * 200x200mm HueForge prints, with connectors allowing to easily slide the pieces together to get a sturdy frame.

If you can, print with a low layer height for better quality (I recommend 0.08mm if you're not in a hurry, but 0.12mm is fine too).

Make sure you grease the connectors a bit before trying to merge the parts, or sand them a little bit if you find it too tight.

0.6mm nozzle One Frame Per Plate - 7 Sizes Prints faster. Still holds Hueforge nicely.

0.6mm nozzle, Multiple Frames per Plate Prints faster - still holds Hueforges