POLYZON
TOYOTA SR5 HITCH COVER PLUG
TOYOTA SR5 HITCH COVER PLUG — Фото 2 из 10
TOYOTA SR5 HITCH COVER PLUG — Фото 3 из 10
TOYOTA SR5 HITCH COVER PLUG — Фото 4 из 10
TOYOTA SR5 HITCH COVER PLUG — Фото 5 из 10
TOYOTA SR5 HITCH COVER PLUG — Фото 6 из 10
TOYOTA SR5 HITCH COVER PLUG — Фото 7 из 10
TOYOTA SR5 HITCH COVER PLUG — Фото 8 из 10
TOYOTA SR5 HITCH COVER PLUG — Фото 9 из 10
TOYOTA SR5 HITCH COVER PLUG — Фото 10 из 10
3D-модель · MakerWorld

TOYOTA SR5 HITCH COVER PLUG

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
CC-BY-NC-SA
Только некоммерческое использование с указанием автора; переделки — под той же лицензией.
Форматы
3MFSTL
  • 10 Лайки
  • 36 Загрузки
  • 6 Напечатали
  • 27 В подборках
  • 0 Бусты
  • 1 Комментарии
  • 0 Просмотры

Автор:tundra3866cda

Опубликована

Скачать на MakerWorld

Описание

TOYOTA SR5 HITCH COVER PLUG

SUGGESTED PRINT SETTINGS

Nozzle: 0.4

Layers: 0.2

Infill: 15%

Print with PETG. I printed mine with PLA but after having 2 not making it thru the car wash, I printed another and covered it with epoxy and it has held up for months now.

INSTALLATION

Fits tightly in a standard 2” receiver.

Boost Me Boost to Burn? Appreciate it. Search for my other Toyota centric hitch plugs on Maker World, generic Toyota hitch included:

- 4 RUNNER - HIGHLANDER - LANDCRUISER - SEQUOIA - SR5 - TACOMA - TOYOTA OEM LOGO - TOYOTA TRUCKS - TRD - TUNDRA

Руководства и профили печати

Профили печати и шаги

0.2mm layer, 2 walls, 15% infill TOYOTA SR5 HITCH COVER PLUG

SUGGESTED PRINT SETTINGS

Nozzle: 0.4

Layers: 0.2

Infill: 15%

Print face up on Textured PEI plate

Print with PETG. I printed mine with PLA but after having 2 not making it thru the car wash, I printed another and covered it with epoxy and it has held up for months now. You can see it in the actual picture as the red Toyota emblem with the word “Nightshade” underneath.

INSTALLATION

Fits tightly in a standard 2” receiver. Note the picture of the two screws. I used this type of screw to hold the plug tight against the receiver opening. Pre-drilling the hole first will keep the plastic from fracturing.

V2 - 0.2mm layer, 3 or 4 walls, 15% infill PETG V2 Revamp Update

- Lengthened to have 2 mounting pass thru holes - Inverted to print face down - Inverted so requires no supports

Теги

toyotatoyota sr5sr5hitch coverhitchtrailertrailer accessoryautomotiveautomotive accesoriesplug capplugplug covertow hitchtow
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.