Aux Fan Grill / Cover AMS not needed

Membership If you want to use this model commercially, please join my membership. If you like my project, give me 👍, it will make it easier to reach others 🙂

Boost Me Each project takes hours or days of design and testing. There are also a few or a dozen test prints to make sure everything fits as best as possible. If you like my project, appreciate my work and want new projects of this type to be created in the future, support me so that I will be motivated to continue working 😉 Thank you for current and future boost 😉

Description:

I designed this cover because I couldn't find a similar model (with a higher logo).

I designed it in two versions.

V1 AMS required:

Voronoi filling, printed version with the top facing the bed flat.

A version for people who want a cover quickly :P

This version includes a cover without a logo, with a logo, with a logo and an inscription.

We print, put it on and it's ready ;)

V2 AMS Not Needed:

Voronoi filling, printed version with supports.

For the last 3 layers (at a height of 0.16), we change the color of the filamentand i'ts ready 😉

I made this design just for this version, because in this version the logo protrudes above the cover by 0.5 mm, so it looks great!!!

It's true that you have to spend a while to remove the supports, but I think it's worth it :)

In this version, the cover is available in a version with a logo, and with a logo and text.

Printing:

Layer height 0.16.

V1 - we print with the top flat to the bed.

We can change the colors in the slicer if necessary.

V2 - we print with support.

In the slicer, set the color change on the last 3 layers on the slider on the right (at a layer height of 0.16).

Thanks to this, there is only one color change during printing and less filament is wasted ;)

I designed these covers to match the covers from my other project:

Good luck and I invite you to test my other projects ;)

https://makerworld.com/en/@Piotrek.C