P1 X1 Exhaust Hepa and Carbon Filter - 6x2 magnets

This is my take on the Exhaust filter for P1s and X1C. The size of 135x100mm allows for very good filtration and low air resistance, can be easily installed using 6x2 mm magnets (let me know if more sizes are required) and comes in two different variants.

The container accepts HEPA filters for robot vacuum cleaners (135x50 mm) cheap on amazon (or aliexpress) https://www.amazon.de/-/en/Vacuum-Cleaner-Filters-Replacement-Accessories/dp/B09HHM1YRR

Filter Box Variants: 1- thin hepa only filter, 12mm deep, accepts filter and prefilter (the foam, used to stop bigger stuff) 2- thick hepa + carbon filter, in this case you need to print 2 activated carbon boxes, fill with activated carbon pellets and install before (on top of) the hepa filter .

HEPA filter is the last stage in the flow, aimed at filtering anything that passes the prefilter and the carbon filter, so to also stop eventual carbon dust.