Tetris balance game

0.2mm layer, 2 walls, 15% infill 0.2mm layer, 2 walls, 15% infill

each plate for different color

0.2mm layer, 2 walls, 15% infill for A1 mini 0.2mm layer, 2 walls, 15% infill

plate 9 with support

Original Tetris Colors, 1 Plate per Color/Block-Type

for A1 Mini | Original Tetris Colors, 1 Plate per Color/Block-Type only difference is that the smaller pedestal (plate 2) had to be printed on its own plate.

Small Brims | Original Tetris Colors, 1 Plate per Color/Block-Type During my printing sessions, I encountered a few instances of poor-quality filaments, leading to issues with warping. To address this, I utilized a specific printing profile equipped with brims for certain components.

AMS No Waste, Only 3 plates (print by object, P1/X1 only) I've kept all of the original parts, but reduced it to 3 plates.

By changing the plate settings to print by object instead of by layer, and spacing them out / rotating them so the print head does not collide, they all fit and you can have 3 colors on each plate with only 1 filament change per color e.g. almost no waste.

Requires P1/X1.