Apple Watch Charging Stand Homepod Design

0.2mm layer, 2 walls, 10% infill - 0.2 mm layer heigt with variable layer height setting - no support - 10% infill

Anti-tipping, heavy infill in the lower part Anti-tipping design by using denser infill in the lower part (35%).

0.16mm layer, 2 walls, 10% infill for the rest of the print

Adaptive Layer Height, Fuzzy Skin on top, Ironing - Adaptive layer Height - Fuzzy skin - Ironing - 2hr 15min - 15% rectilinear infill incase you want to add small weights in it

Anti-tipping, Dual Color, Sportsband Fix Remix of the "Anti-tipping, heavy infill in the lower part". I had some issues with my Apple Watch 9 with the sports band that it wouldn't completely connect flush with the charging puck, resulting that it wouldn't charge after while. So I cut out a small part of the top sides (see picture) so that the strap doesn't hit the base anymore and made sure that it still looks nice. Now it charges without any issues 😊

If you don't want to have two colors you can remove the Cylinder in the objects tab! It took a while to get the dimensions right as I'm fairly new with this, suggestions or ideas are always welcome!

0.2mm layer, 2 walls, 15% infill, fuzzy skin, ironing - 15% Adaptive Cubic infill - fuzzy skin - ironing 20% flow - 100 mm/s Outer wall speed Print time: 2h 55m

Filament: 43.56g

0.16mm layer, 2 walls, 10% infill A more detailed two-tone version of the model, with adaptive layer height for less noticeable layer lines, and more colorful to fit the vibe of your room or setup.

0.2mm layer, 2 walls, 10% infill Fits perfect! Printed with Bambu PLA matte.

0.2mm layer, 2 walls, 10% infill Many Thanks! Printed wit Bambu PLA matte!

Older Larger (34mm x 12mm) Charger

For Series 7 Watch- with larger receptacle Fell in love with this design.  Printed one for hubby, His Series 7 charger did not fit.  Scaled to 125%. While the charger does snap in nicely- it will not be flush- but it does work.  Will update when I learn to thicken the walls around the charger.