POLYZON
Skull Heart Hueforge Bookmarks - 2 sizes
Skull Heart Hueforge Bookmarks - 2 sizes — Фото 2 из 7
Skull Heart Hueforge Bookmarks - 2 sizes — Фото 3 из 7
Skull Heart Hueforge Bookmarks - 2 sizes — Фото 4 из 7
Skull Heart Hueforge Bookmarks - 2 sizes — Фото 5 из 7
Skull Heart Hueforge Bookmarks - 2 sizes — Фото 6 из 7
Skull Heart Hueforge Bookmarks - 2 sizes — Фото 7 из 7
3D-модель · MakerWorld

Skull Heart Hueforge Bookmarks - 2 sizes

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
PRIVATE-USE
Только для личного использования: печатать для себя, без продажи и распространения.
Форматы
STL
  • 86 Лайки
  • 87 Загрузки
  • 50 Напечатали
  • 200 В подборках
  • 6 Бусты
  • 19 Комментарии
  • 0 Просмотры

Автор:Hey Ben

Опубликована

Скачать на MakerWorld

Описание

Skull Heart Hueforge Bookmarks - 2 sizes

Large 65mm x 200mm Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 65.03x200mm in size You may print at higher layer heights below the Min Depth of 1.1mm The Max Depth is 3.1mm and the Actual Depth is 2.6mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.2 PLA BambuLab Basic Magenta Transmission Distance: 3.1 PLA BambuLab Basic Jade White Transmission Distance: 5.7 This print uses 3 unique filaments

***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions: Start with Black At layer #19 (1.6mm) swap to Magenta At layer #24 (2mm) swap to Jade White for the rest.

Small 50mm x 150mm Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50.03x150mm in size You may print at higher layer heights below the Min Depth of 1.1mm The Max Depth is 3.1mm and the Actual Depth is 2.6mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.2 PLA BambuLab Basic Magenta Transmission Distance: 3.1 PLA BambuLab Basic Jade White Transmission Distance: 5.7 This print uses 3 unique filaments

***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions: Start with Black At layer #19 (1.6mm) swap to Magenta At layer #24 (2mm) swap to Jade White for the rest.

More Bookmarks can be found here

Hueforge Bookmark Book Nook can be found here

Check out my other models and hueforge files here

Don't forget to post pictures of your prints! Enjoy!

Boost Me If you like and enjoy the model and want to encourage me to continue to make more models like this, then send me a boost! Hope you enjoy! Thank you!

Руководства и профили печати

Профили печати и шаги

Small 50mm x 150mm Skull Heart Hueforge Bookmark Skull Heart Hueforge Bookmark

Small 50mm x 150mm Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50.03x150mm in size You may print at higher layer heights below the Min Depth of 1.1mm The Max Depth is 3.1mm and the Actual Depth is 2.6mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.2 PLA BambuLab Basic Magenta Transmission Distance: 3.1 PLA BambuLab Basic Jade White Transmission Distance: 5.7 This print uses 3 unique filaments

***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions: Start with Black At layer #19 (1.6mm) swap to Magenta At layer #24 (2mm) swap to Jade White for the rest.

More Bookmarks can be found here

Hueforge Bookmark Book Nook can be found here

Check out my other models and hueforge files here

Don't forget to post pictures of your prints! Enjoy!

Large 65mm x 200mm Skull Heart Hueforge Bookmark Skull Heart Hueforge Bookmark

Large 65mm x 200mm Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 65.03x200mm in size You may print at higher layer heights below the Min Depth of 1.1mm The Max Depth is 3.1mm and the Actual Depth is 2.6mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.2 PLA BambuLab Basic Magenta Transmission Distance: 3.1 PLA BambuLab Basic Jade White Transmission Distance: 5.7 This print uses 3 unique filaments

***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions: Start with Black At layer #19 (1.6mm) swap to Magenta At layer #24 (2mm) swap to Jade White for the rest.

More Bookmarks can be found here

Hueforge Bookmark Book Nook can be found here

Check out my other models and hueforge files here

Don't forget to post pictures of your prints! Enjoy!

Теги

skullskull 2dskull 2d artskull 3dskull 3d printed artheartskull hearthueforgeartart 2024art 2025art 2dart 3dart 2d 2024bookbook markbookmarkbookmark 2d artbook marksbook markerbooksdisplayframestandbooknookbook nookp1pp1sx1ca1a1 a1 minia1 miniamsams - liteams litegothicpinkwall
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.