Sanding Block (3.6" x 3" Sandpaper)

Overview

The sanding block holds 3.6" by 3" [91 x 76 mm] sandpaper which can be cut from common sheet sizes such as 3x 3.6" by 9". The block has a 90-degree corner and a 0.5" radius for sanding different edges. This sanding block is designed to only use printed parts.

Materials and Printing

Materials such as PLA or PETG are suitable.

- 2-3 walls - 5-10% infill - No support Assembly

Materials

- Bottom - Bottom Thread - Handle - Handle Lock - 3.6" by 3" [91 x 76 mm] sandpaper sheet Instructions

- Slide the Bottom Thread part into the Bottom. Optionally, add super glue to fix it permanently.

- Wrap sandpaper around the bottom assembly. - Install the handle over the assembly and move the sandpaper to clamp tightly.

- Lastly, thread on the Handle Lock to clamp down the sandpaper.

- Ready to start sanding! Boost Me Add a boost if you like this model!

Check out other models

Stackable Organizing Box

Print-in-place organizer

Pill Shape Organizer

Print-in-place pill organizer

4 Way PTFE Splitter Adapter

AMS and external spool adapter

Pocket Sized Pill Case

3 day pill organizer