Collapsable fidget Santa's hat

V2: Hat with Pom-Pom Connector (Improved Adhesion) Hi everyone! I’ve prepared another version of the hat, this time with a connector for the pom-pom. Many of you mentioned having issues with bed adhesion - I’ve made some adjustments, and hopefully this version will print without any problems.

The connector works with a simple click mechanism, but for best results, I recommend securing it with a drop of super glue.

Better adhesion

0.2mm layer, 2 walls, 15% infill

A1 mini 0.2mm layer, 2 walls, 15% infill

With hole 0.2mm layer, 2 walls, 15% infill

PLA Adaptive Layers, 2 walls, Print by object, 04 nozzle. PLA profile, print by object and adaptive layer, also reoriented to fit on A1 Mini Plate.

My other stuff: Please visit my profile page for my own designs and other print profiles.

https://makerworld.com/en/@NinjaAsok

Är du Svensktalande? Gå med i den Svenska telegramkanalen https://t.me/bambu_sverige

[Optimal Profile] 0.16mm layer, 2 walls, 10% gyroid infill clean and easy print without brim or support,

slowed first layer for better adhesion, print by object

0.2mm layer, 2 walls, 15% infill, Fuzzy skin Fuzzy skin modifiers on white elements.

Print by object, 2 times

v2.1 Hat - Brim fix for non sticking pom pom Prints individual colours. No need for support.

Brim included on white pom pom. Ensure your bed is clean before print.

slowed down, 0.20/0.12mm layer slowed down for more reliable print

0.12mm layer height for pom pom for a smooth look

P2S, set of 4 hats with 2 plates Optimized for the P2S bed, split into 2 plates: one for white parts and 1 for red parts.

I agree with the original designer--a dab of glue helps the pom pom stay on the top of the hat.