Female Jedi Blue Saber Hueforge Bookmark - 2 sizes

Small 50mm x 150mm Female Jedi Blue Saber Hueforge Bookmark Female Jedi Blue Saber Hueforge Bookmark - 2 sizes

Small 50mm x 150mm Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50.03x150mm in size You may print at higher layer heights below the Min Depth of 1.1mm The Max Depth is 3.1mm and the Actual Depth is 3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.2 PLA PolyLite Azure Blue Transmission Distance: 3.4 PLA PolyLite Aqua Blue Transmission Distance: 3.3 PLA BambuLab Basic Jade White Transmission Distance: 5.8 This print uses 4 unique filaments

***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions: Start with Black At layer #16 (1.36mm) swap to Azure Blue At layer #21 (1.76mm) swap to Aqua Blue At layer #26 (2.16mm) swap to Jade White for the rest.

More Bookmarks can be found here

Hueforge Bookmark Book Nook can be found here

Check out my other models and hueforge files here

Don't forget to post pictures of your prints! Enjoy!

Large 65mm x 200mm Female Jedi Blue Saber Hueforge Bookmark Female Jedi Blue Saber Hueforge Bookmark

Large 65mm x 200mm Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 65.03x200mm in size You may print at higher layer heights below the Min Depth of 1.1mm The Max Depth is 3.1mm and the Actual Depth is 3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.2 PLA PolyLite Azure Blue Transmission Distance: 3.4 PLA PolyLite Aqua Blue Transmission Distance: 3.3 PLA BambuLab Basic Jade White Transmission Distance: 5.8 This print uses 4 unique filaments

***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions: Start with Black At layer #16 (1.36mm) swap to Azure Blue At layer #21 (1.76mm) swap to Aqua Blue At layer #26 (2.16mm) swap to Jade White for the rest.

More Bookmarks can be found here

Hueforge Bookmark Book Nook can be found here

Check out my other models and hueforge files here

Don't forget to post pictures of your prints! Enjoy!