POLYZON
FLEXI MOOSE | PRINT IN PLACE | NO SUPPORT
FLEXI MOOSE | PRINT IN PLACE | NO SUPPORT — Фото 2 из 5
FLEXI MOOSE | PRINT IN PLACE | NO SUPPORT — Фото 3 из 5
FLEXI MOOSE | PRINT IN PLACE | NO SUPPORT — Фото 4 из 5
FLEXI MOOSE | PRINT IN PLACE | NO SUPPORT — Фото 5 из 5
3D-модель · MakerWorld

FLEXI MOOSE | PRINT IN PLACE | NO SUPPORT

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
CC-BY-NC
Можно печатать и изменять для себя с указанием автора; продавать модель и отпечатки нельзя.
Форматы
STL
  • 443 Лайки
  • 594 Загрузки
  • 248 Напечатали
  • 1 018 В подборках
  • 27 Бусты
  • 35 Комментарии
  • 0 Просмотры

Эта модель на других площадках

Автор:Critters Territory

Опубликована

Скачать на MakerWorld

Описание

This Flexi Moose is an articulated print-in-place model that needs NO supports.

Like with all my designs, I went through several iterations to make sure it was strong, and easy to print without supports.

Please feel free to share images of your prints on this page, I would love to see them.

Thank you.

=> If you like my Flexi Moose, Check out my other models.

https://makerworld.com/en/@C_Territory

https://cults3d.com/en/users/CrittersTerritory/3d-models

https://www.myminifactory.com/users/CrittersTerritory

https://crittersterritory.etsy.com

https://www.cgtrader.com/designers/sd3d-store

ALL Critters Territory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

To legally sell them, you may obtain my permission through this https://www.patreon.com/crittersterritory

Please help support the creative work of each 3D artist and NEVER share or sell a digital file.

3D printing settings

Printing Material :- PLA Printing Bed Temp. :- 60 Printing Nozzle Temp. :- 215 Printing Speed :- 60 mm/s Infill % :- 15% Initial Layer Height :- 0.3mm Layer Height :- 0.2mm

Руководства и профили печати

Профили печати и шаги

0.2mm layer, 2 walls, 15% infill Printing Material :- Pla Printing Bed Temp. :- 60 Printing Nozzle Temp. :- 215 Infill % :- 15% Initial Layer Height :- 0.3mm Layer Height :- 0.2mm

50%, one color, 0.2mm layer, 2 walls, 10% infill Model reduit a 50%

Impression en une couleur

One Color, 0.2mm layer, 2 walls, 10% infill

50% Multicolor version 0.2mm layer, 2 walls, 15% infill I scaled the moose down down to 50%, so it moves from articulation.

Теги

articulatedtoymoosesambaroxmodelflexiblecoolmovingnewattractivefidgetstressreliefflexianimalfantasy
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.