Slightly Over Engineered Trash Bag Roll Holder

Boost Me Your free Boost will help me buy materials for future designs! Thank you so much for your attention and participation :)

https://www.buymeacoffee.com/maxt

----------------------

2 versions in one package:

- Without a recycle logo on the side - With a recycle logo on the side Why should you use this model and not the others?

- It won't break, ever (as long as you use it for the trash bag rolls) - The bag roll will never fall out through one of the sides - The bag roll is very easy to pick up - Enough extra spacing to fill a 60mm Ø bag roll without a problem, but you can resize the model as you please to fit bigger bag rolls - Can be used to accommodate any length of the bag rolls by simply spacing the left and right sides out as needed (I suggest adding an extra 0,5cm on each side of the bag roll) - Can be mounted using double-sided tape or screws - Because you've just spent a minute reading the reasons why to use this particular trash bag roll holder and not the others. If you're still here, we know you mean business - you need a solution that just works. This holder got you covered! The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish

Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 (much more important vs infill percentage!) Support: Not required Brim: Not required Infill: 15-30% Fill pattern: Support Cubic

Happy Printing!

Boost Me Your free Boost will help me buy materials for future designs! Thank you so much for your attention and participation :)