Free-flight glider model "WingStar"

Single Colour, V0.1, Wing Option 2 First layer 0.2 mm, then 0.16mm layer. 2 walls, 100% infill.

Print can be done on smooth and textured plates.

Cool down the plate with completed printing before removal of the parts.

Single Colour, V0.1, Wing Option 1 First layer 0.2 mm, then 0.16mm layer. 2 walls, 100% infill.

Print can be done on smooth and textured plates.

Cool down the plate with completed printing before removal of the parts.

Wing assembly requires glue application, see instructions.

Basic, V0.1, Wing Option 1 First layer 0.2 mm, then 0.16mm layer. 2 walls, 100% infill.

Print can be done on smooth and textured plates.

Cool down the plate with completed printing before removal of the parts.

Wing assembly requires glue application, see instructions.

Basic, V0.1, Wing Option 2 First layer 0.2 mm, then 0.16mm layer. 2 walls, 100% infill.

Print can be done on smooth and textured plates.

Cool down the plate with completed printing before removal of the parts.

A1 mini, V0.1, Wing Option 1 First layer 0.2 mm, then 0.16mm layer. 2 walls, 100% infill.

Print can be done on smooth and textured plates.

Cool down the plate with completed printing before removal of the parts.

Wing assembly requires glue application, see instructions.

A1 mini, V0.1, Wing Option 2 First layer 0.2 mm, then 0.16mm layer. 2 walls, 100% infill.

Print can be done on smooth and textured plates.

Cool down the plate with completed printing before removal of the parts.

Single Colour Move all objects onto a single plate and print in a singular colour. I printed in Rainbow PLA.

0.16mm layer, 2 walls, 100% infill, 2 Plates, Nose with brim Nose printed with brim and moved to second plate

Extra Wing Clamps - 6 pack - PETG - 0.20mm Stronger wing clamps printed in PETG with randomized seam to remove weak point.  6-pack of clamps, printed at 0.20mm with brim.

double thick wings => much more stability, optimized for ASA - wing and tail unit twice as thick and therefore significantly more stable (2 layers) - rotated 45° on the print bed for precise longitudinal and transverse print lines - holes for the stand are no longer present due to the adjustment of the wing thickness

enlarged to 150%, optimized for ASA just a perfect bigger flyer

0.16mm layer, 2 walls, 15% infill PCTG

0.16

2 wall

2 colors

0.2mm layer, 2 walls, 15% infill nez d'avion pour hélices motorisées

il n'y a que le nez de l'avion avec un trou pour la batterie mettre la carte au plus prés des ailes et les moteurs sur les ailes comme la photo

ce design viens de Arty_SC  n'oubliez pas de le booste