FILAMENT SHELF - DOWEL SHELF STORAGE SYSTEM

Welcome! Here's some highlights of this system:

⭐️ Files Pre-Oriented for Optimal Strength & Easy Printing. ⭐️ Models fit in a 220x220 build volume ⭐️ Designed in Tolerances ⭐️ Two Center Bracket Style Options ⭐️ Inexpensive Storage Solution ⭐️ Ideal for Filament Storage ⭐️ Designed for Either Stud or Drywall Mounting ⭐️ Easy Install with Standard Hardware ⭐️ Tolerance Test Print Included ⭐️ Printable Drill Templates Included

I look forward to community additions to this storage system. If you design a neat accessory, post it for everyone to enjoy! Please link back to this page in the description of your design.

Hardware Needed:

This system was designed to use commonly available hardware: - Drill Bits (9/64" for Studs, 5/16" for Drywall) - #12 Wood Screws (Use appropriate length for your installation) - Toggler 1/2" Drywall Anchors (Amazon: https://a.co/d/7icmPwP ) - 3/4" Dowel Rods of your chosen length - Drill Template for whichever brackets you're using.

The holes on the drill templates will allow you to mark the locations for your pilot holes. A line is included on each template indicating the height of the top of the dowels for reference.

Files Included: - Two Middle Bracket Styles (For Studs & Drywall) - Right and Left End Brackets (For Studs & Drywall) - Tolerance Test Print - Drill Templates for each bracket type

Here's the link to the containers shown in the photos, if you're interested: https://a.co/d/dbcqdHo

Enjoy!