POLYZON
Doctor Strange Movie Poster - Hueforge Art
Doctor Strange Movie Poster - Hueforge Art — Фото 2 из 2
3D-модель · MakerWorld

Doctor Strange Movie Poster - Hueforge Art

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
PRIVATE-USE
Только для личного использования: печатать для себя, без продажи и распространения.
Форматы
3MFSTL
  • 28 Лайки
  • 17 Загрузки
  • 15 Напечатали
  • 65 В подборках
  • 3 Бусты
  • 6 Комментарии
  • 0 Просмотры

Автор:Lumpy3D

Опубликована

Скачать на MakerWorld

Описание

Hueforge art of the movie “Doctor Strange” (2016)

Project: Doctor Strange (2016) poster.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x199.99mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Mistletoe Green Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Mistletoe Green At layer #13 (1.12mm) swap to Yellow At layer #19 (1.6mm) swap to Jade White for the rest.

Руководства и профили печати

Профили печати и шаги

0.08mm layer, 2 walls, 100% infill Project: Doctor Strange (2016) poster.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x199.99mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Mistletoe Green Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Mistletoe Green At layer #13 (1.12mm) swap to Yellow At layer #19 (1.6mm) swap to Jade White for the rest.

Теги

doctor strangestrangebenedict cumberbatchstephen strangewongmcumarvelmarvel comicsmcu moviemarvel movieavengerscomicsuper heromarvel studiosmoviepostermovie posterhueforgefilmmovie artmemorabiliagifthueforge movie posterhueforge posterhueforge artamsams litea11 amsno amssingle amsplaqueno supportseasy printflat2dcinemagame roomtheater4 color4 colors4 color hueforgesigncollectiblecollectible artcollectible hueforgeman cavedr strangewall artfan art
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.