Pikachu Keycap
Pikachu Keycap — Фото 2 из 3
Pikachu Keycap — Фото 3 из 3
3D-модель · MakerWorld

Pikachu Keycap

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
PRIVATE-USE
Только для личного использования: печатать для себя, без продажи и распространения.
Форматы
3MFSTL
  • 407 Лайки
  • 436 Загрузки
  • 184 Напечатали
  • 1 312 В подборках
  • 10 Бусты
  • 31 Комментарии
  • 0 Просмотры

Автор:GDDesign

Опубликована

Скачать на MakerWorld

Описание

A wild Cherry MX Pikachu Keycap appears!

This keycap should fit all cherry mx switches. If not, select both “stem_1” and “stem_2” in the object list and resize it 1-2%, depending on how it fit to your keyboard

I made this with a 0.2 nozzle , I tried with a 0.4 with the finest setting, but I couldn't get a good result. But don't let that stop you from trying, I'm still learning all the slicer stuff. If you have any tips on that front, do share!

The file is fully colored and is ready to be printed, however, I did experience a very slight but not too noticeable color bleeding.

Let me know your thoughts and happy printing!

Руководства и профили печати

Профили печати и шаги

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill The profile is with my own support and ironing settings. I recommend normal support for this instead of tree. Tree failed about half the time for me. I found a pretty neat ironing setting online and tweaked it a tiny bit. It should work fairly well. You might notice an ever so slight color bleeding (black into yellow), you might need to play around with flushing volumes.

Теги

pokemonkeycapkeyboardpikachuvideogamecherry mx
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.