Happy Little Trees with Bob Ross

Won't you join Bob Ross as he paints some happy little trees?

----------------------------

My designs are for personal printing use only.

A commercial license to sell printed copies is available on my Patreon:

https://www.patreon.com/busykikibee

Patreon members also have access to exclusive designs available only on Patreon.

----------------------------

Project: Bob Ross Happy Little Trees Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.64mm The Max Depth is 2.5mm and the Actual Depth is 2.6mm

This print uses 8 unique filaments PLA BambuLab Matte Dark Blue PLA BambuLab Basic Red PLA BambuLab Basic Mistletoe Green PLA BambuLab Basic Beige PLA BambuLab Matte Lilac Purple PLA BambuLab Matte Ice Blue PLA BambuLab Matte Lemon Yellow PLA BambuLab Matte Ivory White

Swap Instructions: Start with Dark Blue At (0.8mm) swap to Red At (0.96mm) swap to Mistletoe Green At (1.12mm) swap to Red At (1.36mm) swap to Beige At (1.68mm) swap to Mistletoe Green At (1.84mm) swap to Lilac Purple At (2mm) swap to Ice Blue At (2.24mm) swap to Lemon Yellow At (2.32mm) swap to Ivory White for the rest.