3D-модель · MakerWorld

Completely 3D Printed Cherry MX Style Switch

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
CC-BY-NC
Можно печатать и изменять для себя с указанием автора; продавать модель и отпечатки нельзя.
Форматы
STL
  • 393 Лайки
  • 2 310 Загрузки
  • 1 800 Напечатали
  • 939 В подборках
  • 22 Бусты
  • 118 Комментарии
  • 0 Просмотры

Автор:StedFast3D

Опубликована

Описание

Created for Fidgets - Will not work as actual keyboard switches

Following the success of my fully 3D Printed WASD Fidget model, I am separately releasing the switch I used in the model. After 2 different versions of failure, I have created a switch similar to existing Cherry MX switches. If you use this switches in your design, please link directly to this page, instead of adding these STLs in your model. Thanks!

Note: These switches require a special housing in order to properly work . Enjoy!

Boost Me After a month of prototyping, here is the separate switch I used in my fully 3D printed WASD fidget model. Liking, sharing, downloading, and boosting really help me out! Thanks!

Руководства и профили печати

Профили печати и шаги

4 Switches, all with Quality Settings and Brim Quantity of 4 Switches

0.1 mm layer height

0.25 mm line width

100 - 200 mm/s speed for greater quality

7 mm outer brim

Do not change brim settings, they are optimized for this print.

Теги

Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.