Dragon Ball Daima Hueforge - Vegeta & Goku SSJ3

Boost Me Project: Dragon Ball Daima.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 166.1x235mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 2.9 PLA BambuLab Basic Yellow Transmission Distance: 5.5 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #9 (0.8mm) swap to Yellow At layer #10 (0.88mm) swap to Black At layer #12 (1.04mm) swap to Jade White At layer #13 (1.12mm) swap to Red At layer #16 (1.36mm) swap to Jade White At layer #17 (1.44mm) swap to Yellow At layer #19 (1.6mm) swap to Jade White for the rest.

Comment imprimer plus de 4 couleurs avec un seul AMS : à partir de 42 sec sur la vidéo

How to print more than 4 colours with a single AMS : from 42 sec onwards in the video