Ikea Skadis - Instax Photo Holder
Ikea Skadis - Instax Photo Holder — Фото 2 из 8
Ikea Skadis - Instax Photo Holder — Фото 3 из 8
Ikea Skadis - Instax Photo Holder — Фото 4 из 8
Ikea Skadis - Instax Photo Holder — Фото 5 из 8
Ikea Skadis - Instax Photo Holder — Фото 6 из 8
Ikea Skadis - Instax Photo Holder — Фото 7 из 8
Ikea Skadis - Instax Photo Holder — Фото 8 из 8
3D-модель · MakerWorld

Ikea Skadis - Instax Photo Holder

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
PRIVATE-USE
Только для личного использования: печатать для себя, без продажи и распространения.
Форматы
STL
  • 266 Лайки
  • 570 Загрузки
  • 473 Напечатали
  • 1 019 В подборках
  • 21 Бусты
  • 56 Комментарии
  • 0 Просмотры

Автор:SonderObscuraStudios

Опубликована

Скачать на MakerWorld

Описание

Boost Me If you like this model and want to see more, please drop a boost! It's greatly appreciated as many hours go into my designs and lots of failed prints! Thank you! :) note: people have reported that this holder works with other photos brands such as polaroid. I have only been able to test with instax photos but if you can let me know in the comments what works for you all, I would appreciate it!

My design allows you to easily mount and display your physical instax and polaroid photos on your IKEA SKADIS Pegboard.

The design allows you to freely move the photos within the peghole so you can display in all directions (left, right, up, down):

There are four print profiles for different lengths.

- 30mm (one instax photo) - 60mm (one instax photo) - 254mm (four instax photos) - 340mm (six instax photos - covers half of the IKEA SKADIS Board - 9 Holes)

This design prints nicely without the need for supports.

Check out my other IKEA SKADIS Photo design which holds two photos at once (top and bottom):

https://makerworld.com/en/models/986185#profileId-960914

Looking for more of my Instax mini / Photo 3D Designs, check out my collection here:

Руководства и профили печати

Профили печати и шаги

0.16mm layer, 2 walls, 15% infill Prints without supports, I recommend using this print profile as I have printed this exact model successfully dozens of times during my testing process.

0.16mm layer, 2 walls, 15% infill Prints without supports, I recommend using this print profile as I have printed this exact model successfully dozens of times during my testing process.

0.16mm layer, 2 walls, 15% infill Prints without supports, I recommend using this print profile as I have printed this exact model successfully dozens of times during my testing process. The width is 254mm so I do not believe this can be printed on A1 mini

0.16mm layer, 2 walls, 15% infill This design is 340mm in width - this prints diagonally and will take up the entire bed. This will only print on 256x256x256 print beds (sorry A1 mini!)

I recommend using my print profile as I have successfully printed this on my P1S numerous times.

Теги

ikeaskadisinstaxfuji filmpolaroidskadis ikeafilmphotophotographholderorganizerhouseholdpeg boardpegboarddogscatspetsfamilyfunctional
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.