Wahoo ELEMNT Roam V2 Mount for Canyon CP07 Cockpit CF

Because I used the default mount point for bicycle computers of the “Canyon CP07 Cockpit CF” to mount my light and GoPro, I designed this mount for the Wahoo ELEMNT Roam V2 to be placed on the upper flat pipe of the handlebar.

NOTES:

- The upper part has to be printed with support. - You also should print it in a material more resistant to temperature than PLA (e.g. PETG, ABS, …) - You have to pause the print at 11.2 and 16.6 mm to insert the square nuts (the 3MF file already includes the pauses)

Additionally required parts:

- Wahoo Bicycle Computer Mount - M3 Square Nuts - M3 x 16 hex socket screw - An old bicycle tire (or something similar to protect the handlebar)

Use a piece of an old bike tire to wrap around the handlebar, or, as I did it, glue it to the printed part before mounting it to have some protection.

Support my work

For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).

If you want to support my work directly, you can buy me a coffee .

If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code " @Whity " at checkout or click one of the following links (the code only works for the first order of each printer model): | CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |

Also check out my other models .