Twilight Imperium 4 Organizer (incl. Prophecy of Kings)

This is an organizer for the board game Twilight Imperium 4th Edition and its expansion Prophecy of Kings.

It is a remix of my previous organizer ( https://www.thingiverse.com/thing:4534520 ), so you can keep the already printed faction boxes and just need a couple more (1x Muaat and 6 regular ones).

The inlay will work with sleeved cards, however, I used rather thin and tight fitting sleeves, so you might want to check that ( https://www.docsmagic.de/100-Docsmagicde-Mini-American-Board-Game-Sleeves-41-x-63-Small-US-43-x-65-Brettspielhuellen ).

Here's what you need to print:

8x Player: Holds all player colored pieces, cards, and a set of dice. Note: The Warsuns only fit disassembled!

23x Faction: Holds all faction-specific cards, tokens, and the home system.

1x Muaat: It's a deeper version to fit the Muaat Supernova.

24x Faction_Lid: There are 3 versions with different tolerances. I'd suggest print the 0,2mm version and then depending on whether it fits to loose/tight try the others.

2x Res: Holds all trade good/commodity, infantry, and fighter tokens as well as some cards (I put the secret objectives and artifacts in there).

1x System: Holds all regular system tiles (blue back).

1x Hazards: Holds all hazard tiles (red back).

1x Hyperlanes: Holds all hyperlane tiles.

3x Hex_Lid: There are 4 versions with different tolerances. I used the 0,0mm version but you can try which fits best for your printer settings.

1x Cards: This holds the action and exploration cards as well as the remaining tokens.

2x Cards_Single: These hold the agenda and planet cards.

Let me know if you have any questions or comments.

Print Settings

Printer Brand:

Creality

Printer: CR-10S

Rafts:

No

Supports: No

Resolution:

0.6

Filament: yourDroid PLA+ Black Notes:

Used a 0.8mm nozzle.

Category: Toy & Game Accessories