Бесплатно 
Ubiquiti Unifi AP stand (edit for U6 LR, will fit other LR/Pro as well)
Printables
3D-модель · Printables
Ubiquiti Unifi AP stand (All in 1, NO SCREWS needed!) - Updated: LR / Pro / Nano / Lite
Сведения о модели
- Площадка
Printables
- Цена
- Бесплатно
- Лицензия
- CC-BY-NC
- Можно печатать и изменять для себя с указанием автора; продавать модель и отпечатки нельзя.
- Форматы
- STL3MF
- 87 Лайки
- 1 088 Загрузки
- 15 Напечатали
- 30 Комментарии
- 3 239 Просмотры
Описание
UPDATE 20.1.2024 - added versions - AP: LR / Pro / Nano / Lite
Complete stand + mounting bracket for Ubiquiti Unifi AP.
The model is All in one, so it can be printed as one piece without need for screws. You just click it on.
In the 3mf file has a negative object inside so that the model prints much faster, needs less filament and also helps with cooling of the AP. (they tend to be very warm 24/7)
You would need to enable supports, but only around the ring.
For the LR / Pro version - if its too tight for you, just scale the model down to 99,5% (deducts exactly 1mm in diameter which is plenty, or print it scaled down right away to be sure.
Please give the model a like if youre happy with the model! …and post us your photo too! 🙂 ❤
Похожие модели
Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.