3D-модель · Printables

Haken zur Befestigung von Fensterdekorationen/ Hooks for attaching window decorations

Сведения о модели

Площадка
Printables
Цена
Бесплатно
Лицензия
CC-BY-NC-SA
Только некоммерческое использование с указанием автора; переделки — под той же лицензией.
Форматы
3MFSTL
  • 2 Лайки
  • 8 Загрузки
  • 0 Напечатали
  • 0 Комментарии
  • 135 Просмотры

Автор:tom

Опубликована

Описание

Zur Befestigung von Fensterdekorationen mit Abstand zur Fensterscheibe eignet sich dieser Haken. Der Haken wird durch eine Schnappverbindung in den Winkel eingesetzt und kann leicht entfernt werden, um z.B. das Reinigen des Fensters zu erleichtern. Die Ausladung beträgt ca. 60 mm. Je nach Stärke des Fensterrahmens steht der Winkel etwas vor oder passt gar nicht. Also bitte vorher messen! Bei uns ist die besondere Situation, dass wir innen ein Sonnenschutzrollo haben, auf das der Winkel geklebt ist.

Die Befestigung erfolgt mittels Powerstrips Large, die Fläche am Winkel ist dafür 45 x 22 mm groß. Die nicht klebende Lasche des Powerstrips ragt über den Winkel hinaus, um ein Lösen des Powerstrips zu ermöglichen.

Translation: DeepL

This hook is suitable for attaching window decorations at a distance from the window pane. The hook is inserted into the bracket using a snap connection and can be easily removed, e.g. to make it easier to clean the window. The projection is approx. 60 mm. Depending on the thickness of the window frame, the bracket may protrude slightly or not fit at all. So please measure beforehand! In our case, the special situation is that we have a sun blind on the inside to which the bracket is glued.

It is attached using Powerstrips Large, the surface area on the bracket is 45 x 22 mm. The non-adhesive tab of the Powerstrip protrudes beyond the bracket to allow the Powerstrip to be removed.

Теги

Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.