Sewing machine presser foot for zippers

Sewing machine presser foot for zippers. Print with sufficient detail in something that will give you good bridging and little stringing, optimised to need no supports. Keep in mind that the attachment bar is not metal so don't just drop the presser foot bar on it like you would with a metal one. Press the release lever when installing. Can be flipped to work on both sides. Print in this orientation and remove any flashing you may get from the plate, also deburr and sand away any hooks created by filament edges, but printed with sufficient detail and filament with low stringing and good layer adhesion it should work straight off the printer.

Print Settings

Printer Brand:

Prusa

Printer: Prusa Mk2

Rafts:

No

Supports: No

Category: Household