Minimalist Picture Frame for 100x148mm 4x6 Pictures

A very minimalistic picture frame for 4x6 (100x148mm) pictures.

It has multiple mounting holes for pins or nails, depending on if you want to mount it portrait, landscape, at a slight tilt, as a chain, etc.

The Frame uses barely any filament, I only have a normal kitchen scale, and it doesn't even register the weight, so I would guess about 2-3g.

Printing: Nothing special, just make sure that you print it without supports, the corners need to be printed with bridging, to create the gaps.

I've included STEP and fusion files, if someone wants to change the dimensions. There are some parameters:

- Picture_Width: Width of the picture - Picture_Height: Height of the picture - Picture_Thickness: Not really the thickness of the picture, but of the gap, 1mm seems to work well - Layer_Height: Height of the printed layers, determines the thickness of all the parts - Picture_Tolerance: how much additional space around the picture should be, 0.15mm seems to work well - Hole_offset: The offset for the two holes from the mid point