Jonsbo N4 60mm Fan mount

Hey, I was trying to improve the airflow in the drive bay of my Jonsbo N4 Homeserver case, and I saw that there is a vent above the PSU, and since air takes the path of least resistance, I assume that a lot of the air being sucked out by the 120mm fan and the PSU fan probably comes from there and not from the drives...

Plan a was, to at least block it of…

And plan B is this bracket, you can fit a 60mm fan perfectly and the rest of the ventilation holes are still blocked... I used a Noctua A6, which is quiet, and I would recommend a fangrill because of the cables.

You need at least 8 of these thick 5x10mm Fanscrews and depending on your mainboard and fan a fancable extention (i needet one)

happy printing!