Desperado Elite Cylinder _BETTER DART FIT_ (Dart Zone, Adventure Force)

Desperado Elite Cylinder with extra long and tight barrels

for 1x elite sized dart or 1x short dart loaded with ramrod (highest fps) or 2x short darts (shotgun)

You have to use at least a 10mm spring spacer for good fps results because the barrels are very tight and need more pressure

+10mm spacer: short dart with ramrod ~100fps, standard dart ~91 fps +20 mm spacer: short dart with ramrod ~105fps, standard dart ~103fps

If you want to shoot 2 short darts at once you should use at least a 20mm spring spacer otherwise the darts will not fly well.

As with all printed barrels, it is always a good idea to sand the inside of the barrels with a rolled up piece of sandpaper to smooth it out a bit.

The file is already pre-oriented.

My print settings for PLA:

0,2mm layer height 5 walls 20% gyroid infill 7 top and bottom shell layers Tree supports are needed for the opening of the axis mount in the middle

Thanks to png for the files I could use for this remix.

The half dart only cylinder (by png) with shorter barrels you can download here.