xTool P2/P2S Riser

This is a fixed height riser for the xTool P2/P2S. The model is designed as a tapered cylinder with a recess area at the top for the feet to be inset. The riser elevates the machine approximately 36mm for engraving cylinders with larger diameters while still allowing for the rotary cable to reach its port.

Print 4 to make a set in whatever material and using your own preferred settings. I chose PLA using 0.2mm layer height, 3 wall loops, 10 top shell layers, 5 bottom shell layers, and 20% Gyroid infill.