Bit Wrench Tool - Strong grip

Intro

This is a super helpful bit wrench tool! Try it! You will love it!

PS: The tool was designed to hold the bit rather tight - it will get worn out when you use it a couple times. Use pliers or a thin nail (opening on the top) to get the bit out.

Why you'll love it?

- Suitable for all HEX bits

- Print is done quick and easy…

Recommended print settings

- Nozzle: 0.4

- Layers: 0.2

- Infill: 100%

- Perimeters: 2

- External perimeters first (important for accuracy)

- Material: I recommend to use PLA or PETG (see below)

Please mind, every filament has a slightly different behavior and every bit varies slightly in size too. So if it doesn’t work in the first run with your filament/bit, please make sure to activate the “External perimeters first” option in your print settings. You also can try to change the size of the print a little bit (e.g. scale it to 101% or even 102%).

Filament recommendation

I printed this model using Prusa Prusament and got great results. See below for my recommendations.

Prusament PLA Prusa Orange

Copyright

You are welcome to print this model for personal use. Please respect the copyright. Unauthorized reuploads are monitored and reported.

Feedback & Support

If you enjoy this model, please consider hitting the LIKE button – it truly supports my work.

Have ideas, FEEDBACK or suggestions for improvements? I’d love to hear them – feel free to leave a comment.

Printed it already? That’s the best compliment! Please share a photo in the MAKES section – seeing your prints is incredibly motivating and helps others get inspired too.

Thank you for supporting independent designers and makers. ❤

Follow me for more like this...

FOLLOW ME for more practical prints, upgrades, and tools – new models coming soon. Check out my profile for all uploads.

You may also like these models

This model is part of my huge collecion. Do not miss to check out what else could be useful to you.