Бесплатно 
AR15 PMAG M3 Dust Cover no supports
Printables
3D-модель · Printables
AR15 PMAG M2 + M3 Dust Cover no supports
Сведения о модели
- Площадка
Printables
- Цена
- Бесплатно
- Лицензия
- CC-BY-NC-SA
- Только некоммерческое использование с указанием автора; переделки — под той же лицензией.
- Форматы
- STL
- 101 Лайки
- 559 Загрузки
- 10 Напечатали
- 14 Комментарии
- 1 238 Просмотры
Описание
New design that fits both M3 and M2 PMAGs. Huge thanks to @CodfishDan_1930853 for helping me tweak the model to fit M2 PMAGs!
Dust Cover for MagPul AR15 M2 + M3 PMAGs. Optimized for printing. I was able to get rid off all but one overhang, but a well calibrated machine can handle the small remaining overhang easily without supports.
Versions available:
- v5 : standard version - v5 LT : removed as much material as possible but therefore not as much surface on print bed. if you have issues with adhesion, use v5 instead - both versions have a lanyard loop for paracord
Recommended Print Settings:
- print on side (file is oriented correctly) - 0.15 or 0.2mm Layer Height - no supports needed - 3+ Perimeters - 100% Infill - PETG
Local laws apply
If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…
Похожие модели
Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.