Voron Flat Mesh Skirt BTT PiTFT43 2.1 Display Mount

To be used with the Flat Mesh Skirts for Voron 2.4 ( https://www.printables.com/model/608754-flat-mesh-skirt-voron-24-350300250mm ). I remixed the original to be able to mount a BTT PiTFT43 2.1. Similarly to the original, the cable can be routed through the opening in the back cover and the base. Everything was re-created from scratch using the original STL files as reference and both STL and STEP are offered as options. Also available is STEP for the BTT PiTFT43 2.1 itself to use as reference.

BOM:

- 8x Heat inserts - M3x5x4 (Voron spec) - 4 for front cover - 4 for front skirt - 8x M3x6 SHCS - 4 for back cover to base - 4 for back cover to front cover - 4x M2x6 or M2x8 SHCS (back cover to BTT PiTFT43) Order of operations:

- Screw the base into the skirt - Attach back cover to base - Attach display to back cover - Attach front cover to back cover Print Recommendations:

- Re-orient the models when slicing them - Print at 0.2 layer height - Print with standard Voron settings