Hockey Stick Wall Rack Hooks - Multiple Sizes - No Screws

Hockey Stick Wall Rack Hooks

I made these because all of the designs I could find either mounted sticks vertically up a wall or were better suited for display sticks rather than those seeing regular use (and most need to be mounted with screws and anchors).

Nothing special here other than the dimensions are designed specifically for hockey sticks. This is the result of my first couple hours putzing with CAD software so I may update with more refined versions. Please note that the hooks shown on the wall in the pictures are about 20% (unnecessarily) wider than the designs here. They could also be mounted much tighter together than I did.

Please read the descriptions below to see which ones you need:

Stick Hook: Fits up to a senior size stick with a basic tape job. Uses medium Command Strips (or slightly trimmed large ones).

Stick Hook XL: For those who need a bit more space for gnarly tape jobs. Most goal sticks will need this for the increased wall clearance to accommodate a larger knob. Uses medium Command Strips (or slightly trimmed large ones).

Stick Hook Goalie: Use this for the paddle of a goal stick. I tested it on a few different types of senior sticks and it worked fine; make sure you test the placement of it before putting it on the wall, though, as some paddles are much thicker towards the shoulder. Also note that you will have to mount this lower than the hook you use for the shaft of the stick. Accommodates a full large Command Strip (but a medium should work if it is what you have).

Printed using generic settings for PLA in OrcaSlicer.