Dewalt dw735 bag adapter & stand mount.

I needed a way to keep the bag and dust hose in place on my DW735s mobile stand. No one had a 2.5 inch wall mount with an angled 4 inch bag adapter, not without needing several different items anyway. This will take 2.5 inch dust collection hose and adapt it to a 4 inch bag opening. It also angles the flow 30 degrees into the stands shelf where the bag will sit. It uses a total of six, flat head M5 screws, however if you wish not to use flat heads you could just put washers over the cones opening. The screw holes that hold the two pipes together have raised flat surfaces on the inside pipe so the nut and washer can sit flat against the surface of the inside without damaging the pipe. The 4 inch end for the bag attachment has a raised lip to help prevent the bag from pulling off during use. I use this along with NightLonks "All in one 90 degree 2.5 inch adapter", It works extremely well for this (Link below). This adapter should work well for any tool that uses forced air (blower motor) for dust collection. Links to items used in this project: -PVC Dust Collection Hose: https://www.amazon.com/dp/B09BNVHJ21?ref=ppx_yo2ov_dt_b_fed_asin_title -Powertec Dust collector bag: https://www.amazon.com/dp/B0D223H8W5?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 -M5 Flat Head screws: https://www.amazon.com/dp/B06Y3X1J7V?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_22&th=1 -NightLonks 90 degree All-In-one adapter: https://www.printables.com/model/760994-dewalt-dw735-all-in-one-90-degree-to-25-inch-hose