Fursuit Head Dryer

I wanted a more portable fursuit head dryer that I could take to cons. I came up with this two part head stand. It uses a standard 120mm fan and is designed to fold up into a resealable bag (including the fan).

Print settings that I used:

- Polymaker Polylite ABS - 0.4mm nozzle - 0.20mm layer height - 3 wall lines - 5 top/bottom layers - 30% infill - support enabled everywhere for the top part Notes:

- Both parts have built-in hinges and are designed to print in place - Having support enabled is required for the top part - I recommend using a fan with a fan grill to prevent fabric or fingers coming into contact with the fan blades - (optional) You can add a sheet of paper/cardboard with the center cut out between the fan and feet to improve air flow. A pdf template is provided