Silly Shell -- 4x / 5x MEGA Dart -- (for Anemone, Wildstyle etc.)

Silly Shell – 4x MEGA Dart

(for Anemone, Wildstyle, barrel launcher attachments, etc.)

I combined a Silly Shell with air duct dart posts to shoot multiple MEGA Darts simultaneously with good performance.

Minimized dead space through air duct posts.

Unfortunately I can't measure the FPS correctly with my chronograph but the MEGA darts fly straight, far and hit hard during my tests with the Anemone ;)

Works also great with my Silly Shell Launcher Attachment .

This shell has a length of 187 mm and is much longer than the normal Silly Shells and therefore more suitable for blasters like the Wildstyle, Anemone or Silly Shell Launcher Attachments.

FPS test with the Anemone (3 bungee loops):

4x MEGA Darts: ~ 58 FPS 5x MEGA Darts: ~ 53 FPS

Please sand the the outside of the air duct dart posts a bit so that the darts have as little friction as possible on the layer lines. Sanding the posts improves the FPS, the shooting range, reliabilty and and helps to load the darts easier and faster.

I've also designed a few other unconventional multi-dart silly shells with separate airtight barrels or spigots: * 6x / 9x / 12x Short Dart Silly Shell (+Triple Ramrod) * 4x / 5x MEGA Dart Spigot Silly Shell * SNIPER + MEGA XL Spigot Silly Shell

The files are already pre-oriented.

My print settings for PLA: 0,2mm layer height 4-5 walls 7 top and bottom shell layers 20% gyroid or cubic infill (print with outer brim if you have poor bed adhesion) >>> No supports needed

Thanks to Sillybutts for the files I could use for this remix.