Clarinet Stand

This stand is based on an existing design.

Print Instructions:

- Material: PLA (but you could use what you like) - 20-25% infill - Perimeters: 3 or 4 (the print will get its strength from the perimeters) - Layer height: 0.25mm for the 1. layer, 0.2 mm for the rest - Use some self adhesive furniture leg felt pads for the cushion - The model dimensions are, the exact dimensions of the final product, so you may need some sanding to get the perfect fit in the holes and grooves. Or feel free to modify the .stl by the required tolerance fit to your printer.