Elegoo Centauri Carbon - Poop chute - magnetic

Snap in place - Removable poop chute for the Elegoo Centauri Carbon.

Poop chute which snaps in place with magnets. The poop chute “floats” and is connected to the printer, which comes in handy with the anti-vibration feet installed.

No supports needed !!! Orient the model on the print bed as you would use it in the real world !!!

Update 2026-01-02

Model uploaded for 3x10 magnets combined with slots for square magnets 10x5x3.

Holes are 3 mm deep.

Update 2025-07-21

Model uploaded for 3x6 / 3x8 magnets. Holes are 3 deep and dia = 8mm.

- One version with logo's

- One version w.o. logo''s

The original model 1.2-2.0 x10mm magnets is also re-uploaded with a slight improvement (bottom radius is chaned to a chamfer/straight edge.)

- One version with logo's

- One version w.o. logo''s

User request: 35mm deep variant is also added with logo's for 1,2-2.-x 10mm magnets.

- Set wall printing order to: Inner/Outer for best overhang quality.

- 6 magnets (10x 1.5 or 2 mm) Select the right model.

- 6 magnets (6x 3mm or 8x 3mm) Select the right model.

- Glue