WofCrafft vise boltlock in the Dremel Workstation 220

I have created the bolt locker with cap based on the design of SilverTripple for the column lock of the Dremel Workstation 220. This will makes the adjustment of the vise tool less.

Printed in Bambu Lab PETG-HF filament with the settings below.

Nozzle = 0.4mm Layer height = 0.16mm optimal

Strength: Wall loops = 6 Top surface pattern = Rectilinear Bottom surface pattern = Rectilinear Sparse infill density = 45% Sparse infill pattern = Rectilinear