Starlink Mini (2025 version) Pole to Tripod adpater

Add a pause at 8mm and push in a 1/4-20 nut. Make sure it is recessed below the current print hight.

I printed mine with prusament PC-CF, .2mm, 5 walls to make the outer wall solid. The lock bolt that comes with the mount will thread itself through the hole in the side and it provides a very solid mount.

Use the long version if you intend to mount a lens plate or want to use 1/4 -20 to mount to a large flat surface.

These are the ¼-20 nuts I used: https://www.amazon.com/dp/B0CJ9FFH2Y?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1