Batman anfas picture - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 136x170mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 1.8mm and the Actual Depth is 1.9mm

Filaments Used: PLA+ HIGH SPEED Jamg He Black Transmission Distance: 0.3 PLA HIGH SPEED 3DPower Telegrey Transmission Distance: 3.1 PLA+ HIGH SPEED Jamg He White Transmission Distance: 6.9 This print uses 3 unique filaments

Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Telegrey At layer #19 (1.6mm) swap to White for the rest.

My custom frame for this model: https://www.printables.com/model/1354495-picture-frame-for-my-hueforges