Staffbull picture - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x170mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm

Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #392412 PLA 3DPower Brown Transmission Distance: 0.2 #ffa62c PLA HIGH SPEED 3DPower Papaya Orange Transmission Distance: 5.7 #ffff89 PLA HIGH SPEED 3DPower Amber Yellow Transmission Distance: 6.2 #ffffff PLA+ HIGH SPEED Jamg He White Transmission Distance: 6.9 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Brown At layer #15 (1.28mm) swap to Papaya Orange At layer #19 (1.6mm) swap to Amber Yellow At layer #22 (1.84mm) swap to White for the rest.