20×20 mm Calibration Cubes – Variable Wall Thickness (5 mm to 0.35 mm)

A collection of 18 calibration cubes (20×20x20mm) with wall thicknesses ranging from 5 mm down to 0.35 mm in small increments.

Why use this set?

- Quickly spot over- or under-extrusion. - Check if your slicer and printer produce accurate dimensions. - Identify the best settings for thin walls and small details - Dial in flowrate for different materials (PLA, PETG, ABS, etc.) Wall thicknesses are:

5mm 4mm 3mm 2mm 1,5mm 1,25mm

1,10mm 1,05mm 1mm 0,9mm 0,8mm 0,7mm

0,6mm 0,55mm 0,50mm 0,45mm 0,40m 0,35mm

Don't forget to share your results!

It helps me get Prusameters.