Voron Skirt Antenna Mount for CM4 / CM5

I made this antenna mount for my printer after a few days of it banging around inside the wiring cabinet. I did consider mounting the antenna underneath and also inside the inverted wiring cabinet but I didn't want to forget it was underneath and smack it nor did I want to further clutter up the wiring inside. The easy to damage antenna lead is still protected inside the skirting, too. The hexagon bases push snuggly into the open hex spaces and the eye/leg is a nice tight friction fit. You may want to add a dab of CA glue to join the leg to the base. I didn't need to. Also, I printed the eye/leg part on a raft.

If your CM mounts anywhere near the skirting the antenna cable should hopefully reach for you, too.

I increased the first layer flow to 1.2 in Orca to better squeeze/stick the small hex body parts to the textured build plate.

You may also be interested in my other Voron Trident mods shown here or at https://www.printables.com/@JimChristian_3198049 & https://www.printables.com/@JimChristian_3198049/models They work well :-)

Also, if you find value in this, please give it a like. Thanks.