LCD frame for Ender 3 (Pro)

Broad LCD frame for Ender 3 and Ender 3 Pro. Covers all black borders outside of the display. The frame clips in place and requires no glue. Depending on your print settings and the tolerances of the LCD holder of your Ender, it might be on the tighter side. If so, either sand away a bit on the clipping parts, or print it again at 99%. Alternatively, the frame can be secured using thin double sided tape (carpet tape) on the backside.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.15 mm

Infill:

None

Notes:

When using Cura, I recommend setting the first layer pattern to "concentric" for best results. Depending on how well your extruder steps/mm are calibrated, it might also be useful to reduce the flow a bit to around 90% after the first layer. This will lead to a better fit.

Category: 3D Printer Parts