Parametric Vase Mode Desiccant Container with Funnel

I wanted a brim on the lid for my container so I could put it in a spool and not worry about it falling out and breaking, so I added the option into the OpenSCAD file.

From the original model description by DrJones:

Customizing:

- Download, install and run OpenSCAD, it's completely free (open source; Win/Linux/Mac), - load the scad file, - customize in the customizer panel on the right, - press F6 to render and F7 to export STL. Printing:

- use vase mode - set external perimeter extrusion width (advanced settings) to the extrusion value set in the model, 0.8mm by default. This can be done with a nozzle of 0.4mm (or 0.6mm or 0.8mm) - set bottom layers to 4 or 5, except - for the funnel use 0 bottom layers - for some speed use filament settings→cooling→slow down if layer time is below: 4s - I use 0.2mm layer height, but other values should be fine - split into objects (the [o] button at the top of the slicer window) and delete what you don't want to print