E3D Revo 6 mount for Ender 3 v2 neo

This is a mount that I have made for the E3D revo 6 on the ender 3 v2 neo.

I got insperation from https://www.youtube.com/watch?v=dZz-eR3d5YE , it's a video on a mounting method for the E3D Revo 6 on the Ender 3 V2. remixed toolhead: https://www.thingiverse.com/thing:6617981 you will need two M3x10mm screws and two M2x8-10mm screws to use this mount.

This should be printed with tree supports and a brim under build plate adhesion, 100% infill, and with PETG, ABS/+, or ASA (ABS or ASA if in an enclosure) filament or metal.

I have also used a new part cooling fan duct that I have remixed to work with the E3D Revo 6. https://www.printables.com/model/1466041-revised-nozzle-cooling-duct-for-ender-3-v2-neo

This mounting method should also be able to be used on https://www.amazon.com.au/dp/B0FR3GXGB1/ref=sr_1_1?crid=3HRK9256L284E&dib=eyJ2IjoiMSJ9.PjSytHsz4SuAmTPN7vyVNlHVa_34w765bm5fJQaJbyuaNhEU28gZLs52j3DqAy9Y2XBvgyy63H4jD7CnDvc9386wOu_pkJi2TaX5bXONeS5CUadvqG3iV42j4-Wtv5i8BTybtGeSnEFFQCMCcmZRWq_wDBiJ-Y1cawWnWya9z587I94zKKAlSsHfITnuQWBibdJY392Or-y-reQBnDV40TiCr-jPSuoeXwrlyP6PM0OxRfywTBeJy_nye9zJ2V8yaEOuEx-z2ajCEdvG5kZbbMYC3d-3nb0Tu3p0XMbuNko.3RZ-PxQXKmjdy6vYW8GFgboUgEqM1nvUOTAbsF5ltoA&dib_tag=se&keywords=e3d%2Brevo&qid=1759104499&sprefix=e3d%2Brev%2Caps%2C209&sr=8-1&th=1 (Australian version of amazon)

or https://www.amazon.com/E3D-Genuine-Upgrade-Printing-Included/dp/B09V1M3TB4/ref=sr_1_3?crid=KG1KGHR1BQ5D&dib=eyJ2IjoiMSJ9.BWypz5vbiWdctmz_OQuN6P4Rz5TyGSLOA0VZF7r0l8iAjZVkJfM2JsA18aBsu-ShXX6EIykyyEfCIkZP8yKxDZ7jxhB1izksAHLvOON0RL5f6UitqrU08jmhOMmfe84Up6RFPeje15uVzOPZE10bTeckLvwyfKaPcLn-Yr5yLf0P2U0ZuuKhLMW14RQyQfXwRjvMdLWvC8pMgGnQfUNNS_1GfMeTK7mn1jVSLr8q1Mg.a5BPf5ChJHV-PCuViOngMTa60MfD2UaezyB6QnvPdyE&dib_tag=se&keywords=e3d+revo+6&qid=1759104592&sprefix=e3d+revo+%2Caps%2C291&sr=8-3 (American version of amazon)

If you have any improvements then please comment so I can make them.

V2: I fixed the part of the mount that attaches to the wall so that there is more space. Added a new design, it attaches right on the skrews but might not work as it might be to close to the hotend, if it works it will be in the best position.

V3: I made the second design shorter so that the screws can go in further as in the privous model the screws wouldn't go all the way through.

V4: I added a 3rd mount opption, this mount should hold the hotend in the same place as the origional hotend on the ender 3 v2 neo.

V5: I have made a new design that puts the new e3d revo 6 in the same place as the old hotend, give or take 1mm, the fan is no longer to high or low but now you will need to buy a M3X10MM.

V6: I moved the other mounts to a remix so if you want you can go there to use them.

V7: the old toolhead was to small so I have included a remixed toolhead that has been extended by 10mm

V8: changed the screw holes so you wont need heat set inserts and improved the stregnth and grip of the toolhead.

V9: I highered the holder of the hotend so that it is in the origonal position compared to the old hotend.