iNGCO DBCS0031 Countersink Set Rugged Box

l design the inserts for the iNGCO DBCS0031 Countersink Set. The parametric rugged box is remixed from @TheSameNameTwice .

The inserts for the countersink bits I have created in Fusion 360 and the parametric rugged box I have remixed in the Fusion 360 as well in the parameters according to the dimension.

Parametric Rugged Box Remixed:

- Changed parameters according to the inserts dimension. - Added chamfer in bottom corner and sides of the case and lid ================================================================================

Below are the parameters of per plate for your reference of the print profile:

Plate 1 - Inserts: Filament = Bambu Lab PETG-HF Nozzle = 0.4mm Layer height = 0.16mm Optimal Wall loops = 2 Sparse infill density = 15% Sparse infill pattern = Grid

Plate 2 - Case: Filament = Bambu Lab PETG-HF Nozzle = 0.4mm Layer height = 0.16mm Optimal Wall loops = 3 Sparse infill density = 35% Sparse infill pattern = Gyroid

================================================================================