Vise Jig / V-Block with Saw Guide | Straight 90-Degree Cutting for Pipes and Rods

This 3D printed vise accessory is an essential addition to any workshop, significantly increasing the precision and functionality of your standard bench vise. It is designed to securely hold round elements and ensure perfectly straight cuts .

How to Use:

1. Place the two-part jig onto the vise jaws and clamp it down.

2. Insert your pipe, rod, or shaft into the "V"-shaped recess and secure the element.

3. Mark the cutting line on the pipe.

4. Holding the pipe with one hand and the hacksaw with the other, cut the pipe by guiding the blade along the top guide slot .

• Precise Saw Guide (90°): The integrated guide slot allows you to steer a hacksaw blade precisely at a 90-degree angle to the pipe's axis. This guarantees straight, clean cuts and eliminates manual guidance errors.

• Secure Clamping (V-Block): The special "V" profile securely locks round components, preventing rotation.

• Component Protection: The jig protects delicate pipes from being crushed or damaged by the vise jaws.

⚙ Printing Tips

• Material: PETG or ABS are highly recommended due to their strength and resistance to clamping forces.

• Infill: Suggested at least 50-80% or 100% for maximum rigidity.